Question about Ford Bantam
...l hit the pot hole then car just cut off and Try spraying a shot of wd40 into a couple of the spark plug holes, reinstall plugs and wires and try again. The wd40 will allow the vehicle to start ...
Question about Ford Bantam
Hi need some help on my Ford bantam 1.3 rocam I have no spark and I replaced the coil pack knock sensor and crank pickup stil no spark I do have petrol on it you found the right place right tim e ...
ford bantam 2008 jurking plz help my 2008 ford bantam jurs on 2000rpm but pulls nice after that Mine did the same it was the spark plug wires that was fault
Question about Ford Bantam
hi all, i have no spark and the petrol pump does'nt work om my bantam 1.6 rocam need more information on this question
Fuelrank leak there are some products at an auto parts store made for that problem. Just be careful about static electricity, sparks and flame.
Question about Ford Bantam
Ford Bantam, not cranking, fuel pump not coming on, and no spark. Have you disconnected the battery, or had a flat battery recently? Did you check the BIG fuse on the battery. Do the lights work, is ...
Question about Ford Bantam
d bantam start but misfire al redy replaced the spark pluks an pluk wires are new Please read the article on misfire diagnosis HERE, it is far better than i could ever explain all that can cause ...
...start? Electric or fuel.. not the battery, not the starter, Bendix or solenoid. You could touch the spark plug while someone cranks, if you get "bit" you have a spark to the engine. Then check for ...
95 questions posted
Usually answered in minutes!
122 Questions
94 Questions
65 Questions
57 Questions
25 Questions