Question about Maxon Radio Communications
...squelch circuit or squematic needed- thank you No sound, broken squelch pot, circuit needed. [email protected] Well my friend I have same problem with some radio. Maybe you should try just to ...
...squelch circuit.If you can read a volt meter and Ohm Meter, and can solder ( Make your own repairs ) you may want to call Galaxy as the Techs there are normally very helpful. Good Luck Ed NC ...
squelch circuit can i get a detailed description of squelch control circuit with the circuit diagram ? ok here is the awnser you are looking for you acn download the service manual here. cbtricks.com ...
squelch circuit needs adjusting also. If allelse fails trun up the sq. conrol. the local ( louder ) sIgnals will trigger those signals....The weaker (DX ) signals will be more difficult to hear unless
Question about Cobra Radio Communications
...squelch circuit only, for a 29 LDT. The pot is good, it's brand new. I just finished completely refurbishing this radio, new switches, new lights, new meter, blue/green channel selector window and ...
squelch circuit has gone bad. Doesn't mean that you cannot use the radio, you will just hear static all the time when no one is talking. If the static bothers you, you can always back the RF gain down
...Squelch knob full counter clockwise RF gain knob full clockwise Pa/CB switch to CB Mic plugged in Check coax and antenna connections. Make sure your antenna gommet/insulator is installed correctly or ...
squelch knob doesn't do anything. Your SQ control is either bad or needs to be properly aligned on the circuit board. You can ship it in for repairs at dodgem250.com
...all the integrated circuits to make sure they are working and most important is to turn up squelch to the left and rf gain to the right.If everything checks out and its still not working
Question about Midland Radio Communications
...Squelch "Open" The "Trigger" for that circuit, is getting "Swamped" by signal, and is shorting out, the MCU, senses this and tells the Power Supply it is drawing too much current, and shuts it down. ...
114 questions posted
Usually answered in minutes!
980 Questions
274 Questions
141 Questions
137 Questions
75 Questions