NAD C320 2-Channel Amplifier "marantz parts" Questions

..."let go". There are a few places that stock Marantz parts online. Typically ,this isnt a consumer serviceable issue. I can possibly suggest a repair place depending on where you are. Hope that

Marantz PM7200...Will not power on..dead.. internal fuses are fine. It did this 9 months ago and Sontec the Marantz Repair shop replaced a processor according to part shown on invoice. Its had very ...

...of putting any parts in emulsion before! So that seems strange. I suggest you take it to another dealer, check the Marantz website for a list of authorized service agents and get a second view on

Marantz PM7200 in classA mode make a hum ( not through speakers) So something is making a hum inside the unit? Well the answer is to listen to what is making the hum, with your ear (a drinking straw ...

marantz pm 7200 lost sound, only works when volume is up high, still looks like there are no high or medium frequencies. You have either lost the pre-amp stage or the Main Amp stage. Since you have a ...

I have a marantz pm44se amplifier, I want to replace the two electrole tickets capacitors rated at 10,000 uf and 45 volts, these are elna capacitors, could someone say what brand would be a good ...

marantz amps for service? thanks Jmeredith The symptom sounds like a feeback loop. As long as that indicator is showing near maximum output on one channel AVOID ATTACHING ANY SPEAKERS TO IT!!!! You'll

...Marantz 2220B Am/Fm Receiver. I am running all four channels at the same time (Both Main & Remote). It sounds fine at lower volumes however, when pushed to about half the volume it starts to pop and ...

Marantz PM55SE. Internal Fuse Is Burned Up Unless you are a techie person do not attempt to fix a blown fuse which is on the inside of any system. Why do you think the manufacturer did not put the ...

Marantz or the remote--and now the Sonamp doesn't get the audio signal from the CD line out and won't kick on. Do you have any suggestions? Thanks, Liz Walker I would start over, unplug them and start