Zenith Z166S Clock Radio "alarm face" Questions

...alarm. 1.Look on the face. One the left are two symbols, a 'bell' and a 'music note'. 2. Press the 'Wake 1' button on top, several times. Notice how the green circle on the left of the face switches ...

...nobs. 1 is for to set time (min...) 2sec is for to set timer for that hour...usually is a smaller hand on face of clock. select hour to wake up at and set alarm Button. This is only basic set

face or panel - when you see radio, sound or buzzer light up on the screen alarm is on (to whichever you set it - radio sound or buzzer- if you push the button again it will go off. Took me a while to

...alarm? The glass/plastic over the face may be dull and causing the dim display. Otherwise your VFD is going bad. http://www.electronic-circuitry.com/e/action/ShowInfo.php?classid=61&id=89934 Here ...

face will blink yearc. Turn outer ring of alarm to set Yeard. Press Tuner + once, turn outer ring to set Monthe. Press Tuner + once, set Dayf. Press Tuner +, set Hourg. Press Tuner +, set Min.h. Press

ge 7-4901a How do I turn off the alarms on this clock? Push the SET WAKE/TIME button on the far right of all the buttons - it's the button closest to the CD player. Push it until the 1 or 2 show up on

...face toward the lower left. Default "MODE" is time set. To set the time: Press "SET" followed by either "HOUR" or "MIN" while the display is flashing to increment the hours and the minutes to the ...

...alarm There are two alarms, and the steps are the same . Look on the face. On the left of the big numbers are two symbols, a 'bell' and a 'music note'. That's WAKE 1. On the right of the big numbers ...

off. Wake 2 alarm: Same steps, but for the green circles on the right side of the face. Get a piece of paper, write "HOLD DOWN WAKE BUTTON to stop repeating alarm" and tape it to the back of the clock