Alpine CDA 7893 CD Player "kenwood flashes protect" Questions

...is flashing protect. How do i My kenwood cd player is flashing "protect". How do i enter the code? Page 33 on right side. ...

kenwood car stereo is flashing protect over and over was working perfectly then went into a store and when i started the vehicle the stereo is flashing protect over and over so nothing works. how do i

...kenwood is flashing the word protect. Nothing is working. i installed this strero in my car and all i get is the word protect .now what do i od have you checked all the wires and check your ground ...

my kenwood flash protect after i reset it sounds like it could be either a bad speaker, a shorted speaker wire, or a bad output ic inside the deck. kenwood kdc-w4034y flahs "protect"

my Kenwood KDC-X493 deck is flashing "Protect" , my Kenwood KDC-X493 deck is flashing "Protect" , what should I do to clear this? You can unplug the unit for 10 minutes. This will clear this

...protect" flashing on my kenwood KDC-MP232 also. I fixed the speaker wire problem but I couldn't get the "protect" message to reset. I had to remove the unit from the dash and unplug the power supply. ...

Protect flashing on my Kenwood kdc-mp4345u check your speakers and speaker wires for shorts. if there are none try disconnecting power to the radio for a few minutes. if protect still comes on you may

Protect is flashing on the radio When the radio is turned on protect starts flashing. Wires all seem to be ok wires are ok but speakers may not be which can put it into protect.other then that your ...

...protect" flashing on the display screen...what gives This is a link to Kenwood for your KDC-X492 instruction manual. Look on page 22 for troubleshooting 'Protect Mode'. ...

Kenwood KDC-MP235 CD player flashes Protect was listening to a cd and all of a sudden it came up flashing protect. check for shorts in your speaker wiring..