Rainbow 75th Anniversary Canister Vacuum "remove head" Questions

remove the head/change the nozzle on unidentified vacuum? I am using a friends vacuum & I cannot work out how to remove the head/change the nozzle? Search Results DC28 Cleaner Head Replacement Removal

head and remove,then attach the hose to the machine,and lock it down.The hose is now ready to be used. Note:When removing the brush head,make the belt lifter knob the fist thing you turn when removing

...remove the head to check for a blockage Press the foot pedal to raise the head to the highest setting. Turn the lever on the head to "off" to remove the belt from the motor shaft. Pull head off of ...

...remove the head. Turn the head over on its back, turn the KIRBY knob to release the old belt. Remove the brush guard by turning the two release fixtures. Remove the guard. Pry the brush out of the ...

...remove the cleaner head of my Dyson 24 upright. it has no release button like one that was featured in a how to video. ?? When i turn the vacum upside down there is no release button to remove the ...

...Head. To check, remove the Power Head and extension tube and try again. If the cleaner runs normally without the Power Head attached, then the problem is obviously in the Power Head. First step - ...

...remove the head piece, turn the belt lifter clockwise and release the lever to remove the head, take off the head, in your attachments there should be a screen that covers the impeller that the belt ...

...the main brush head it runs fine again ? Please HELP :) check for debris in the head and remove Your head is clogged. I had same problem. Probably animal hair. Get a coat hanger and fix it right

...remove the two phillips screws on the collar above the head where the wand tube enters. Then there are four plastic retention clips that can be released with a flat head screwdriver. When lifting ...

...head. Remove the two screws. Flip the power head over. Insert a flat head screw driver into each of the marked slots and separate the two pieces. It takes about 2 minutes. The top plate ...