Rainbow E series Canister Wet/Dry Vacuum "replace power nozzle" Questions

Ad

Question about Hayden Industries Vacuums

1 Answer

replace the belt on a Kenmore canister power nozzle, the process will be identical to your Hayden power nozzle. http://www.fixya.com/support/t4563318-change_belt_sears_vacuum Hopefully this helped you

Ad

...power nozzle model N106m for my grey electrolux? If you're looking for a new head for your vacuum. Then you're going to have to replace it with the same type of nozzle. However, wall inlets are ...

Ad

...power nozzle from operating properly, the most likely is, since it's an Epic series, Is that the power nozzle elbow assembly needs replaced as the fine wires and top of the elbow tend to break/short ...

Question about Hayden Industries Vacuums

1 Answer

...replace the belt. Hello, Actually Hayden's power nozzle is manufacturered by Panasonic for Hayden. Panasonic is the same maker of Kenmore vacuums as well. I have written a detailed repair solution on ...

...Power Nozzle to replace the belt? The Vacuum Model # is MC-V9635 The Power Nozzle Model # is C50XABF0R014. There is no obvious way to open the nozzle up. The top part of the nozzle pops off just put ...

is burning then shuts off on its own. When I use the regular nozzle it does fine. I have cleaned the unit and filter. Any suggestions? Replace the belt in the power nozzle, it has to be changed yearly

...in the bottom, that's the power nozzle. Remove the cover screws and cover and replace the beater and/or belt as needed. Take images as you disassemble to make sure you get it all back in

Question about Rainbow Vacuums

1 Answer

...power nozzle vacuumed with power nozzle one day working fine took attachment off to use crevice tool reattached power nozzle and no power whatsoever ...

replace belt in Kenmore Vacuum Power-mate nozzle I don't have my manual, but the carpet Power-mate nozzle doesn't work and I want to replace the belt, but can't figure out how to take the nozzle apart

Question about Electrolux Vacuums

1 Answer

it's the hose. If not, the wiring in the power nozzle is loose or worn and needs to be replaced. Keep in mind that you may not need to replace the hose or power nozzle, just have some wiring repaired

Not finding what you are looking for?
Rainbow E series Canister Wet/Dry Vacuum Logo

587 questions posted

Ask a Question

Usually answered in minutes!

Top Rainbow Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Kardoc

Level 3 Expert

7503 Answers

Are you a Rainbow Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...