Zeiss Classic B/GA 524013 Binocular "loose barrel" Questions

...barrel has come loose from the lens which screws into the binocular body. It now fits loosely over the lens. How can this barrel be reattached to the lens? The age of the binoculars and the repair ...

...barrel has come loose. IT moves around when you try to use the binoculars. The problem is in the smaller end of the right lense case and moves around whenever you try to focus the set. Can this be ...

barrel is a bit loose. Can I remove the small covers on the arms connected to the centre support and tighten the pin with a screwdriver? Yes , but note that covers are glued so use a pin to lift cover

can use loctite, or nail polish to "glue" the screw in the final position if it is really loose

can use loctite, or nail polish to "glue" the screw in the final position if it is really loose

can use loctite, or nail polish to "glue" the screw in the final position if it is really loose

can use loctite, or nail polish to "glue" the screw in the final position if it is really loose

...barrel to invert the image. When dropped or banged around the prisms may move in their mounts creating the problem you present. I have opened binox and reset the prism effecting a correction, but IF ...

...barrel. Need help repositioning it. My 20 year old 10X40's were dropped last night and the front lens came loose and was then pushed back in but too far. How can I reposition it to the proper place? ...