Troy-Bilt Mtd Troy Bilt TB4218CC 42cc 2 cycle Gas Engine 18" Chain Saw "starts stalls getting fuel 16" Questions

Ad

...getting air no fuel and starts to stall out when i give it gas. idles okay just dies when you give it gas. pull your muffler off and see if it revs up, if it does then your spark aresster screen or ...

Ad

Question about Husqvarna Garden

1 Answer

...fuel restriction opening the screw allows for a larger port for any restrictions to pass through. After you use the saw for a short time turn screw back in if it starts to stall at idle or you notice ...

Ad

getting gas. Took it to a repair shop and he said exhaust was clogged. Burned it out and gave it back to me. Now it overheats within 10 minutes of use. Never overheated before, Even the head gets hot.

...fuel is burnt. Replaced gas filter, and soaked carb,and installed a carb.kit.Can`t find any vaccum leads, flywheel and key ok .Help thanks The idle screw may be turned all the way in on the carb ...

Question about Husqvarna Garden

2 Answers

...starts wont idle I have an older Husqvarna 41 saw I can get it to start but it only idles for about 5-10 seconds. I then need to wait 30-40 seconds for it to start again. it has new fuel line and ...

Question about Husqvarna Garden

1 Answer

i just purchased a used 51. it looks almost new. thought i got a good deal until i used it for about 10 minutes. it started to run sluggish as if i was running out of gas and than it stalled. i tried ...

3200 MAC,I REBUILT THE CARB,WOULD ONLY RUN ON FULL CHOKE,I BOUGHT A NEW WALBRO CARB INSTALLED IT, STILL DOES THE SAME THING.IT SEEMS THERE IS AN AIR LEAK,OR STARVING FOR FUEL. sounds ilke a ai leak ...

by accident I used regular unleaded gas in my chain saw rather than the premixed 40-to-1 blend I have in another gas can? Th engine ran for a short time but stalled several times before I realized the

...starts and runs good for about 15 minutes and then it will just die. It will start back up but the performance is terrible and it stalls out after a few seconds. I have cleaned out the screen on the ...

stalls on giving it gas but idles ok Hi ifwas... Sounds like you have dirt/debris in your caburetor jets,fuel passages or a diaphgram that is becoming non-flexible. Check/Clean/Replace your Air Filter

Not finding what you are looking for?
Troy-Bilt Mtd Troy Bilt TB4218CC 42cc 2 cycle Gas Engine 18" Chain Saw Logo

23 questions posted

Ask a Question

Usually answered in minutes!

Top Troy-Bilt Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Cindy Wells

Level 3 Expert

6688 Answers

kwfordguy

Level 1 Expert

59 Answers

Are you a Troy-Bilt Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...