Mtd Yard Machines 38-Inch 12.5 HP Powerbuilt 7-Speed Riding Lawn Mower Red "machine riding mower gear" Questions

riding lawn mower with automatic transmission. When I shift into gear it makes a noise and will not move. What could be the problem? Is there a way to check transmission fluid? The problem most likely

mower. 1 will be under the seat, causing the engine to die if you were to fall off the machine while in gear. 1 is in the transmission to be sure the machine is in neutral when you go to start it, and

20.5 hp hydrostatic/drive wont go up hills and no power First of all check the back of the machine to make sure that the clutch is locked in gear. If that is not the problem, get back

...to see if powe remains at the starter(small wire) after it starts. Or you need to shim the starter. The gears on the starter may be sticking to the drive gear and not releasing once the machine ...

rideon was under flood idrain engine oil do i have drain gaer and biff oil as well. and what oil do i replace gear oil with. Yes, you do have to drain the gearbox and diff as well, because the oil in ...

riding lawn tractor will not stay in gear /mtd model #13am772g755 Outdoor Power Equipment Parts Use the Part Finder Tool from MTD Inside the transaxle is a detent ball and spring, NOT suggesting that ...

Steering colunm model 700 Steering is very sloppy on my 42 inch ride on. The bushing / gear is noticeably wore. Does the steering colunm have to come out yes

Stuck in gear Yesterday rolled freely in neutral Today put in gear tried to go to neutral but in f,r,n stays in gear and inhibiting Start Tried rocking, depressing clutch and switching from neutral to

...riding mower I have has stoped shifting gears. The mower is running fine. The shifter moves but, the gears are not engaging. almost as if some cable has broken. If this unit is one where the shift ...

...machine, itself. I am not a mechanic but I'm an experienced do-it-yourselfer and I was able, years ago, to repair the transmission on a John Deere riding lawnmower, first by replacing a stripped gear ...