...rifle scope. im shooting about 3" to the right.i moved the adjustment to the left several clicks but my scope fails to adjust. my question is will the adjustment (right/left)dial keep turning or will ...
...rifle check it by looking down the bore again then set the cross up in the scope on what you see down the bore you will need to tweek the scope a bit as you havent taken the bullet drop into the ...
...rifle scope is maxed to the left is there way to recenter adj screw it sounds like your saying the turret is wound over fully to the left? if so the scope mount is at fult...the only way to pull the ...
...rifle be crooked? Crooked scope mounts? marlin rifles have a right hand twist in them,, they all shoot to the right,,,if you pack out the scope mount with a strip of old 35mm film on the right hand ...
Question about Redfield Optics
rifle scope and looking for tips on sightin i have a redfield 3x9 rifle scope and looking for some pointers on how to adjust. if i am shooting down and to the left, do i adjust it down and to the left
...rifle scope and press until it fits flatly against the rim. 3. Using the Adjustable Scale measure the top of your rifle scope tube to the center of the rifle bore as follows: Open the rifle breach. ...
...rifle scope and press until it fits flatly against the rim. 3. Using the Adjustable Scale measure the top of your rifle scope tube to the center of the rifle bore as follows: Open the rifle breach. ...
...scope is currently poiting to the left of the rifle, how do I adjust the weaver mount to get the scope as close to the trajectory as possible? thank you Make sure the nuts are on the same side of the ...
...rifle is pointing and you want to get the scope to look at that very same spot. To move the scope's reticle up or down, turn the elevation adjustment on the TOP of the scope in the direction you want ...
...rifle scope i wanna know how to fix the left and right adjustment since i adjusted it too far to the right it just doesn move any more its the left clicker on my 4 x32 gamo scope cause i was using a ...
2 questions posted
Usually answered in minutes!
2 Questions
0 Questions