Timex Expedition T41261 "replace back watch" Questions

Ad

Question about Timex Expedition Watches

1 Answer

...Replace the back of the watch by pressing it back into place. Make sure that it is securely fastened. It is important to handle the battery with care, as they can be damaged if they are dropped or ...

Ad

Question about Timex Expedition Watches

2 Answers

...http://www.timex.ca/en/instructions/085Instr.pdf Per the link in Keith Retired's solution, after closing the case back up, I pressed all four buttons simultaneously, and the watch came back

Ad

Question about Timex Expedition Watches

1 Answer

replace the battery on a watch. ?? The peizo beeper is usually attached to the watch back, but not in the center. It is usually off to one side, and there is a spring that sticks out of the watch that

Question about Timex Expedition Watches

1 Answer

...at the watch face with 12 at the top (normal) then rotate to the back and place the back on so the words can be read. I hope this makes sense. Top of the words on the back must be exactly at 12 ...

Question about Timex Expedition Watches

2 Answers

...watch back was installed 180-degrees off. I rotated the back 180-degrees and the beep is back now. (The piezo-whatever beeper is located in the watch back, and the little copper "tab" needs to touch ...

Question about Timex Expedition Watches

1 Answer

...on how to replace the battery i have a sinobi sports watch thats stainless steel, back water resistant model (2968g) and i just bought it, but the batteries died and i dont know how to replace ...

...back tot he store and they replaced the battery. The watch has a swiss movement and is not a Timex. It is a store brand of Skatells jewelery shop. Why is the watch losing time? Could it be me? bad ...

Question about Timex Expedition Watches

1 Answer

replace the back cover on a Timex expedition analog wrist watch mcdevito75 here, Look for any indentations on the back cover and case that should be linned up, as an example, a cutout on the cover for

Question about Timex Expedition Watches

1 Answer

back removed to replace the battery? There are four very small screws and apparently there is no way to pry the back off other than to remove the screws. It is a new watch that does not need a battery

back on. Step 4 Replace the gasket that seals the watch. Then lightly coat the gasket with a silicone-based grease. Step 5 Align the back with the little arrow aimed to the right again, then carefully

Not finding what you are looking for?
Timex Expedition T41261 Logo

12 questions posted

Ask a Question

Usually answered in minutes!

Top Timex Watches Experts

Paul Bade

Level 3 Expert

1818 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Ngoro

Level 3 Expert

3523 Answers

Are you a Timex Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...