...eject button is a plastic piece that turns and pushes down on the board and is more then likely broken open the vcr take off the front face plate and check the button, it will propaply fall out. you ...
Question about RCA Televison & Video
...stop flashing by setting the time. Maybe there is some other little magic trick to get the front buttons to work and eject my tape. Thanks. have you pulled the plug from the wall for a few minutes? ...
Question about Panasonic Televison & Video
...stop ,rewind) *the tape does not eject *the tape can only ejected when cut the power and supply the power again and press eject Check if the fast forward button is more inside than the rest of the ...
Question about RCA Televison & Video
...It wont eject the tape and whenever i press any button the time blinks, thats it I took the cover off the vcr pushed on some random parts, blew some dust of it, and put it back together. It
...vidio playerv631 snowy all the time stand by switch ejecting video rewind buttons not working nor stop or play You need to clean the video heads and change the push buttons that not ...
Question about Panasonic Televison & Video
...Eject button , ff button , stop buttons ,,,etc..all does not work. just the tape rollers are running at a considerably higher speed than higher speed. no video or audio signal comes. Hi, some of the ...
...button, but pressing it does not put the VCR to life. No indicators light up. Instead, it looks like a faint horisontal strips glow across the indicator panel. Eject does not work a well as all other ...
...eject button a number of times in order to eject tapes. I purchased it in 1995 and it has been working well until yesterday. Occasionally, it will also "catch" the tapes and pull them out of the case ...
...button and the VHS/TV button simultaneously. You should see a message saying the VCR is unlocked. It worked for me. Hold down the stop/eject button for about 10 seconds and it will turn the lock
my timer recording funtion isn't working i set up the timer funtion but when it goes to turn on. It stops and ejects the tape. I tried a new tape and it still does it. I cleaned the heads and that ...
7 questions posted
Usually answered in minutes!
64 Questions
63 Questions
33 Questions
37 Questions
34 Questions