Question about Dynex Televison & Video
...stuck in auto scan mode it will scan but with no results and it keeps the message up to auto scan with no end results like it is stuck in the auto scan . Please run auto scan , I do this with no ...
Question about Televison & Video
...scan mode, is it scanning for input signals? I'd check the buttons on the tv and make sure the input button isn't stuck in the depressed mode as if someone was pressing it. I'd also take out the ...
...scan Stuck onauto scan channels Try a reset to this TV first. If it do not help you check and replace the main system control memory IC. To do a hard reset, just unplug the TV from AC mains wall ...
stuck on scan after going into sleep mode ?auto switch off tv is stuck on a page which says scanning do not power off switching off via plug or on/off swith does not help Try Re-set... Turn the TV off
...scan mode. It is not on auto program and I cant figure it out. Sometimes it will stop for a few minutes and then just continue for no reason. I erased all the other channel options but it just keeps ...
Question about Sharp Televison & Video
...stuck in TV mode and continuously asks that I "Please Run Channel Auto Scan". I can attempt to change to hdmi but it will not take, remains in TV mode. There are two types of reset to TVs. The first ...
...scan". I've seen that confusion many times! Unless you have 'built in" DVD player. no matter what, it's must be broken! Use external DVD player, instead! $30 and trip to the store, will ...
Question about Televison & Video
stuck on auto channel scan on AVO TV. How to get out of this mode? Is it scanning up or down in channels?
Question about Televison & Video
...stuck on 4 tried scanning it but it goes back to 4 There could be a few possibilities for this .: Change the "Input" setting on the TV to "AV" or "VIDEO". There is probably an "INPUT" button on the ...
...stuck in standby mode Check and replace damaged component/s at its horizontal scan output section circuit. Check the LOT (Line Output Transformer) too for damage. Replace the horizontal scan output ...
21 questions posted
Usually answered in minutes!
405 Questions
364 Questions
299 Questions
263 Questions
243 Questions