...voice coils and subs is this: Two items of the same impedance in parallel = Half of the impedance 4 ohms in parallel with 4 ohms = 2 ohms 8 ohms in parallel with 8 ohms = 4 ohms Two items of the same ...
Question about Hifonics Car Audio & Video
...wired in series. Or something similar. http://www.bcae1.com/spkrmlti.htm two dual 2 ohm subs = .5 ohms wired parallel and 2 ohms wired in a series / two dual 4 ohm subs = 1 ohm wired pallallel and
...XM-1002HX is a two-channel amplifier with power ratings of 100 watts x 2 or 280 watts x 1 into 4 ohms and 140 watts x 2 into 2 ohms. ... Output Power at 14.4V (20Hz ∼ 20kHz): .High ...
...subs with this amp. Which Alpine subs would work best with this amp? this amp is rated at 600w at 4 ohms and 1000w at 2 ohm so as long as you calculate your speakers to match the ohm specs of the amp ...
...for resistances in series or parallel to get what you want. for example if the amps output is 8 ohms and you have two 4 ohm speakers wire the speakers in series. if your output is 4 ohms and you ...
p2 2 ohm to 1001 watts hifonics brutus best i can tell, the amp is stable @ 1 ohm, but 6 colis x 2o ohms is 12 ohms, and 2 ohms divided by 6 drivers is 1/3 of an ohm. you will have to study ohmms law,
...subs off of the 500/1 JL amp This is a single channel amp that puts out about the same power at 4 Ohms or 2 Ohms. If you have two 4 Ohm single voice coil subs, then wire them parallel (both pos and ...
I'm having problems getting full power to my sub. I have a single channel bazooka amp and a 10'' mtx jackhammer. The amp is 2 ohm and the speaker is 4 ohm. Can I bridge by using 1 channel? A 2 ohm ...
...12" dvc subs that are 4 ohm and a 2500 watt mono amp that is 2 ohm stable. How do I wire them to 2 ohms + on amp output to + on speaker #1 to + on speaker #2. - on amp output to - on speaker #1 to - ...
Question about Pioneer Car Audio & Video
how to wirea pioneer a pioneer tsw121 sub from4 ohms to 1ohm my pioneer 2000watt 4 ohm sub iwant to wire @1 or 2 ohms That sub have dual 4 ohm voice coils, so it can be wired for either 8 or 2 ohms. ...
54 questions posted
Usually answered in minutes!
82 Questions
26 Questions
22 Questions
17 Questions
13 Questions