Polk Audio PSW250 Subwoofer "powered fuse" Questions

Klipsch ksw subwoofer wont power on I have completely isolated the sub from the receiver and all other speakers. I will unplug the sub and make sure that it is off. The sub calls for a 1.2 A 250V fuse

I believe the unit has a blown fuse, but I cant locate it? Hello, If the fuse is blown, then you can locate the fuses at the power stage of the power supply, trace the LIVE terminal on the you see a ...

light on front isnt on at all.. doesnt seem to power up at all.. Is there a fuse somewhere ? Actually, there is a fuse. You need to take out all the screws and remove the two dials so you can take off

Powered subwoofer keeps blowing 3A-250V fuses Each fuse I install, as soon as I plug it in and turn on the power switch, the green power light comes on and goes out....blown fuse... The transistors at

No power. Fuse was blown but replaced fuse and still no power. If fuses blown there is a case to search for short circuited active parts examples are end-transistors caused by clipping speakers cable ...

No power to my PSW110 Im pretty sure the fuse is blown because my sub isnt getting any power....problem is that i cant find the damn fuse to check it...anyone know? The fuse may be located in several ...

...end powered subwoofer blows its fuse immediately once the new fuse is installed The amp is blown. You need to get it in for service. No telling exactlly what is wrong untill it is opened. ...

plug and No power i have checked the fuse in the plug and the lead is fine. Yamaha Ysp1000 sound system There well my be some internal fuse. If the unit is self powered then the amp may have a problem

I have a jbl eon g2 and used it at 1pm and then at 4pm when I went to power it up, it was dead. I swapped out power cables and line input cables, no power light comes on at all. I looked for a fuse ...

EUROLIVE B215 no power, replace the fuse same thing, fuse are good it came on a few times then power goes out again with no fuse damage, now power stays off your power supply is defect.Fix it.Thank's