Brother LS-2125 Mechanical Sewing Machine "bobbin thread show bottom" Questions

bobbin thread is showing on the top Bobbin thread is showing on top Tension between top and bottom is a BALANCE, and when the bobbin thread shows on top, it means that your top tension is tighter than

bobbin thread up, tighten the top tension. The tension is accurate when the two threads meet "in the middle" of the fabric. On thinner fabric, you might see a tiny spot of bobbin thread on the top and

...bobbin thread shows on the right side, the needle tension is too tight or the bobbin thread, too loose, as shown in the middle drawing at right. When the needle thread shows on the wrong side, the ...

...bobbin thread sensor, it could be dirty causing it to not read the bobbin correctly. When you thread the upper thread, be sure to ALWAYS RAISE the presser foot so the tension disk is released and the ...

...bobbin thread is showing on the top of the fabric? If so, try loosening the upper tension and test. The mid-point between the high and low number is the most common factory setting for upper tension, ...

...thread and bobbin. If the top thread shows on the bottom of the fabric,  turn the dial counter-clockwise (towards a lower number). If the bottom thread shows on the top, turn the dial clockwise. ...

bobbin thread tension. there should be some resistance when you pull on the bobbin thread. if there is none or too little you may have some lint or thread caught behind the bobbin case tension spring.

...bobbin thread is showing on top, the bobbin tension may be too loose. If the top thread shows underneath, the top tension is probably too loose. Since you are having both problems, perhaps a ...

...thread and bobbin thread are in a "tug of war". If the top is "winning" or too high then the bottom thread will be showing on the top of the fabric. If the top is "loosing" or too loose then the top ...

...bobbin thread with white needle thread on my MegaQuilter with Qbot. Is there a way to adjust the needle thread so it doesn't show at all on the back? In my experience, I can adjust the tension on my ...