top thread stuck near bobbin My bobbin is wound properly, and I have rethreaded several times. The top thread becomes stuck on the silver piece in front of the shuttle when I try to pull up the bobbin
Question about White Sewing Sewing Machines
...top tension with tension foot down to see if the thread can move or does it get stuck? If it gets stuck the tension control may need adjusted or cleaned. 5. Pull the bobbin thread above the throat ...
Question about Bernina Sewing Machines
...top of the bobbin door is stuck into the cover of the free-arm. If there is suficient gap between the top of the bobbin door and the free-arm cover, you could try sliding a thin piece of metal or a ...
Question about Sewing Machines
...JAMMED. Foot stuck in place. Whirring sound from TOP right side of machine . HAVE REMOVED ALL TREAD that was jammed by bobbin. Needle IS NOT bent. it sounds like the machine needs to be ...
...on the foot control but you get a buzzing sound from the motor, then, either the btakeup lever is at the top holding the machine back or you have a small piece of thread stuck in the bobbin case
...the presser foot. Remove the two flathead screws that secure the needle plate from the machine and remove the plate. You'll have a top view of the bobbin housing and see the thread that's stuck to
Question about Sewing Machines
...stuck and the tension doesn't seem right top or bottom I basically can't get it to sew! Install a brand new needle. Remove the top thread from the machine. ALWAYS RAISE the presser foot and ...
Question about Singer Sewing Machines
...stuck on bobbin winder on top of machine. It will not come off. I am using one of the bobbins that came with the machine so I know it is the right size. How do I get it apart to look at it? Is thread ...
Question about Sewing Machines
I have a Singer Sewing Machine Model # 237 and the lakeup lever is stuck on top. How do I get it down? It was sewing all along and just got stuck on top/ the machine needs to be serviced
Question about Sewing Machines
...threads and pull them out piece by piece until you can remove the bobbin case. If the top thread is stuck somewhere inside your machine where you can't get to it, you may need to take it for
57 questions posted
Usually answered in minutes!
132 Questions
105 Questions
58 Questions
66 Questions
64 Questions