White Sewing 2037 Mechanical Sewing Machine "bobbin jumping around" Questions

Ad

Question about Janome Sewing Machines

1 Answer

bobbin? If you are using pre-wounds and they are not this size... they will jump around alot. The size of an "L" is very similar, but they are not as tall (height off the table when laying flat on the

Ad

Question about Singer Sewing Machines

2 Answers

...bobbin is top loading they will flop around some when the start getting close to empty if it's a bottom loading bobbin & case then it's not inserted correctly clean under the needle plate.  ...

Ad

Question about Brother Sewing Machines

1 Answer

...bobbin into the bobbin holder or bobbin case as per your manual, ensuring the thread is correctly into the tension spring and bobbin is rotating the right way around. Now thread up and test sew

Question about Brother Sewing Machines

1 Answer

...around the shuttle. Will not move forward. Have cleaned shuttle and changed spool but still not difference. Could there be an easy solution or does it need repair. Came with a ten year parts and ...

Question about Janome Sewing Machines

1 Answer

...bobbin case makes strange noises as though it is jumping around as it is stitching and than stops with a nest of thread built up. I have replaced the bobbin case once but the problem remains. What is ...

Question about Brother Sewing Machines

1 Answer

...the bobbin properly. Try re-threading, this time making sure you pull the thread into the bobbin container tightly. This should stop the bobbin from jumping around the container and spitting

Bobbin will not stay put! Is it jumping around? Is it made of plastic? Some times the plastic bobbins heat up and then kinda 'melt'. You may not see it, but they then don't work great because they are

Question about New Home Sewing Machines

2 Answers

...bobbin sounds like it is jumping around. sometimes the thread is caught in the machine all bunched up. Oil behinde the bobbin holder so that bobbin holder can run smooth in the bobbin casing. ...

...nail around the edge of the bobbin... if you feel it click you have a burr... get your emery board out and use the fine side to smooth it away. Same with any of the other plastic parts under

Question about Janome Sewing Machines

1 Answer

...next time I let the thread run through my finger and thumb before reaching the bobbin. I had to do the same on a previous Kenmore. I've also found that the heavier Bernina bobbins don't 'jump'

Not finding what you are looking for?
White Sewing 2037 Mechanical Sewing Machine Logo

109 questions posted

Ask a Question

Usually answered in minutes!

Top White Sewing Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a White Sewing Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...