Question about Samsung Dryers
size screws are needed to attach power cord to a Samsung dryer, model DV42H5000EW/A3. 004 i don't know, this link may help. please note warning that your unit must have a proper ground wire connection
...screws. (not the back plate on the switch panel) Remove the back and your heater is on the lower right hand side and is inside an metal shell. The thermal limit is also on the metal shell and will ...
...size loads, as well as with no load in it at all. It seems to dry ok but we're nervous this might become something worse. Please Help! I have the same problem, cracked drum 2 yrs. 4 months old. What ...
...screws at the top, allowing front panel to pull forward. Unplug drum light and door switch and drum sensor plugs, allowing front panel to be completely removed and set aside. Now, look at the burner ...
wires attached on the top of the element housing. (Unplug dryer, take screws out or push in clips holding dryer top down at the front of the dryer top, swing top back, see thermal fuse near very back)
...screws at the top, allowing front panel to pull forward. Unplug drum light and door switch and drum sensor plugs, allowing front panel to be completely removed and set aside. Now, look at the burner ...
...size of a 12" ruler and place the corner of that ruler in one of those dimples - FIRMLY. Then, a second person can get some leverage on the glass dome and "unscrew" it from the housing ...
size onto the twisted wires tightly and make sure no wiring shows under the wire-but, it could touch something and short out. Getting access to the controller is easy enough, just take the top part of
...screws. Suggest you unplug the machine and take off the back. If you have the kind where the back will not come off, this will be harder, but not impossible. You will need to take the machine apart ...
195 questions posted
Usually answered in minutes!
514 Questions
288 Questions
131 Questions
118 Questions
108 Questions
