GE DPSB613EDWW Electric Dryer "start switch wiring" Questions

...start switch may be the culprit here. Make sure that the wires are connected properly, and not loose or corroded, in anyway. If all is well with the wires, move on to the testing procedure for the ...

...start switch, to confirm the damage. If the start switch passes the test, simply replace the door switch. Locate the start switch(Usually located in the control panel housing). it will have two or ...

...start switch circuit. If you have an interior drum light, and it will illuminate when the dryer door is open, this will confirm that the door switch is ok. Use the test procedure below to confirm ...

start switch. It is damaged, and i recommend to test this switch to confirm. Use the procedure to test properly, below. replace the switch if it fails the test. Locate the start switch(Usually located

start switch will be the culprit. Use the procedure below to confirm the damage. Locate the start switch(Usually located in the control panel housing). it will have two or three wires connected to it.

...start switch. If this is the case, your start switch is suffering circuit failure(unable to maintain a closed circuit during operations). I would advise to inspect this switch for damage. Use the ...

...start switch to run I can start my GE DBSR453EBWW dryer, but I have to continuously hold the start switch to run it. I tried to change to use different timer options, but canot solved the probelm. ...

...start switch now machine starts with the hot and warm button i think i have got my wires crossed the start switch will just have a hot wire,, with a momentary closing when you push the start switch,, ...

start switch issue. I would test this switch for faults. replace the switch if it fails the test. Locate the start switch(Usually located in the control panel housing). it will have two or three wires

...start switch(Usually located in the control panel housing). it will have two or three wires connected to it. Label the wires and connections so that you can properly reconnect them later. The wires ...