GE 24 in. GSD6660GSS Built-in Dishwasher "start light heated" Questions

...> Manage My Life > Questions Nov 16, 2009 - When I hold down the Heated Dry button to turn the control lock on it ...my dishwasher start and why does the "Heated Dry" light keep blinking

light and wont start. Is there a sequence of buttons to reset the switchboard? sani rinse---heated dry---sani rinse---- heated dry.. all the lights on console should light then close the door, let run

...start light see this causes and fix it. God bless you Drain Pump If lights are flashing on the control panel, the drain pump might not be working properly. For two-wire drain pump motors check them ...

...start no heat light and lock on light alternates. The cancel button works and so does the drain but nothing else does. If you touch normal wash the no heat dry light turns on with the normal wash ...

...light on the control panel might start flashing. The heating element assembly can be checked for continuity with an Ohm meter. Heating Element If lights are flashing on the control panel, the heating ...

...start/reset....red light beeps and green clean light continues to flash/ please help this is a safety failure of the unit not heating the water properly. if you push the " water heat, air dry, water ...

...light on the control panel might start flashing. The heating element can be checked for continuity with an Ohm meter. Heating Element Assembly If lights are flashing on the control panel, the heating ...

...and back on. The ohter thing to try is the reset sequence. Within 6-7 secs press High Temp/ Heat Dry/ High Temp/ Heat Dry/ High Temp/ Heat Dry. All lights should light up, press Start button to

...light flashing wont run when you push start This worked great - press Sani Dry, then press Heated Dry - then repeat - press Sani Dry, then press Heated Dry. All control lights will light and then ...

...light up but it wont start. Hello, Thank You for using FixYa. I will be helping you today.Try pressing heated dry,Normal,Heated dry,Normal and all lights should come on if they do wait like 5 seconds ...