GE Monogram® ZET1058 Electric Double Oven "oven door problems" Questions

...oven door doesn't close tight Hello, Anna - The problem of your oven door not closing tightly could be caused by one of several problems: * A problem with the door hinges * Broken oven door springs * ...

...oven Close Door Light intermittently On when my door latch is working perfectly fine? Prior threads about the Door Close message have not addressed this specific issue on my KitchenAid Superba under ...

Oven door lock I opened the oven door after setting the cleanning mode and the door lock came out and I cant close the door . The oven continouoisly beeps I have a problem with the door lock mechanism

...oven door or operate oven bcuz range is waiting to begin cycle. Showing dr error (door open). Need to find way to unlock oven so I can close door and cancel clean cycle. Thanks a million, solved the ...

...the door switch and inspect with a multimeter for continuity connection. Oven is saying to unlock door but our oven door is unlocked what should I do my Mom had just finished self-cleaning the ...

...door on this oven will not stay closed all the way. I have taken the door off and put it back on, but no help. The light will not turn off because of this problem. Please help your oven needs two new ...

oven door is not closing tight enough.the way i fix it is by twisting a towel like a roll and placing it between the door and oven at the bottom close the hinge, then close the door gently by pressing

... The door gasket can also become flat and stiff, compounding problem. Any small gap releases heated air, and oven will not heat up properly. Replacing the door springs should solve problem.- Thanks ...

...oven door to clean. Need instructions to Locked oven door to clean. Need instructions to start the cleaning process on the oven correctly and how to unlock my oven door so I can start over. Have ...

Oven door not shutting fully Make sure there is nothing trapped at the bottom of the door to prevent it closing properly. If nothing obviously wrong, then you will probably need to replace both oven ...