drive shaft since my previous Kitchen Champ model had a different, sturdier drive shaft that lasted about ten years. The company representative explained that the new drive shaft is designed to break,
...drive-shaft and would not move up, down, or sideways - like it was tack welded onto the drive-shaft. I tried all the initial recommended steps: oil-soak, hot towels, pouring boiling hot water, etc, - ...
Drive Shaft stopped kneading dough In the middle of kneading dough my Universal Plus mixer dough hook stopped. The motor is still working. The drive shaft turns with great force when inserted by ...
Question about KitchenAid Food Mixers
...mixer runs but the beater doesn't turn. Drive shaft? the mixer runs but the beater doesn't turn. Drive shaft? a gear or gears. their usually plastic and will damage before the drive ...
Question about Hobart Food Mixers
...drive shaft for Hobart 4346 mixer-grinder? Need to replace bearings and seals on the gearbox shaft which drives the hopper auger. Have opened the cast gearbox and removed the hopper but can't ...
...shaft to drive it out from the bearings and grease seal. 7. Recommend removing and replacing the top bearing at this time; it's inexpensive to replace, if you're in this deep. 8. Use a suitable ...
...shaft? You need a small steel hammer and a pin punch. Do not try to drive out the Groove Pin any other way (i.e. don't force it out with a regular size hammer and a screwdriver), you will only ...
Question about Hobart Food Mixers
...DRIVE SHAFT FOR HOBART MIXER M-800 ? PLANATARY DRIVE SHAFT FOR MIXER M-800 I see Hobart L800 & M 802 but not an M 800 Give these a ...
that the main shaft that drives the sun gear was slipping. My cure was to drill a 5/32 hole a 1/4 inch down through shaft and drive a 5/32 roll pin through it and it solved the problem. See my picture
220 questions posted
Usually answered in minutes!
128 Questions
72 Questions
30 Questions
22 Questions