Sony BRAVIA KLV20G300 20 in. EDTV-Ready LCD TV "standby light flashes twice" Questions

Standby Light flashes twice. My Sony Bravia Standby light is flashing twice and the TV can't be turn on. UNPLUG AND TAKE OFF THE BACK AND CHECK THE FUSES,,MGT BE BLOWN,, this "fault" is usually either

...standby light intermittently flashes twice. Hi, There is a power fault with one of the PCB's inside, contact Sony if you are still in warranty, if not contact a Sony service center as it will need an ...

standby light flashes twice there was a lighting storm and the tv shut down. when I attempt to turn it on the green power button flases once then the standy indicator flashes twice The power supply ...

standby light (red light) flashes 2 twice after 3 seconds. is the tv damaged or can it be reset? please reply [email protected] hello marksrapolai that problem releted with BA board so replace it

...light flashes twice on and off on the bottom of the tv. Any suggestions Right now the standby 5vdc power supply is working but not the rest of the circuits, this can be due to short circuits in the ...

...light blinking twice no picture, no sound, i did change power board and main board but still not working, i didn't reset the tv cause i don't know how? These blinks [flashes] are fault indication ...

...standby light flashes twice followed by a 5 sec gap. Anyone got any thoughts? Thanks Hi, my PDP 50XE just cut out, when powered back on the screen powers down and the standby light flashes twice ...

...standby light is on the power light flashes twice the standby light on my emerson tv stays on when i try to turn the tv on the power light flashes twice then it goes right back to standby I have this ...

...standby light would flash red twice switch to green and click off for several seconds and then repeat. and now no lights come on. this for my lg32lg30 hdtv PCB Power Supply must be checked for ...

...1340,the red light should flash twice. The press the standby button on the sky r/c,the tv should turn off,if it does then press select button on the r/c to store settings. Hope this will work for