Kole audio Nitric XP2-2000 Car Amp "coil dual set voice" Questions

set of terminals on the amp. If your sub is the model RSdC122 with dual 2 ohm voice coils, you should wire the voice coils is series for a 4 ohm load and connect the sug to one set of terminals on the

dual voice coil wiring to class d amp i have 2 volfenhag zx-4712 dvx dual voice coil 12" 500w rms subs. i have noticed most class d amps only have one set of speaker outs like kicker 1000.1 hifonics ...

dual voice coil subwoofer or a single voice coil sub woofer. Dual voice coil(DVC) Depending on how many Ohms each voice coil is you will have the amplifier drive a specific load (4OHM stereo (75 RMS x

...dual voice coil, or 4ohm dual voice coil, so i'll explain both. O.K. first of all i hope its 4 ohm so you can get max power from your sub. If it is 4 ohm dual voice coil connect + to +, and - to - on ...

...dual voice coil sub, make sure that you have the positive and negative terminals connected properly. If you have ONE of the coils wired backwards, it will cause the speaker to produce little or no ...

...dual voice coil speaker with 4 ohms per coil x2 voice coils, wired in parallel. you can also achieve 2 ohms with 2 speakers with 2x2 ohm voice coils apiece (that is, 2 speakers, each with 2 ohm voice ...

dual voice coil; models? 4 Ohms per Coil? I have always used single 4 Ohm Voice ciol speakers since amps are mostly based on 4 Ohm outputs. but you can get 8 Ohm dual voice coil subs also. With 8 Ohms

...dual voice coil sub. You'll need a two-channel amp (which you probably have - if not, get one and make sure it has a low-pass crossover on it, which you want to turn on and set around 100 Hz). Each ...

...dual voice coil and the voice coils of both are wired in parallel then the load become .5-1 ohm and the amp is unstable (solution) wire 2 dual voice coil subs individually one from each terminal, and ...

...the dual 2 ohm voice coils on your 12" sub, you would wire one voice coil to one +/- set on the amp and the other voice coil to the other +/- set. TRY THIS ...