MTX X Thunder 300XD Car Amp "bridging protection light" Questions

...light comes on but the amp works fine when subs are not bridged is the amp able to handle two 4ohm subs bridged? Thanks Are you setting the bridge switch for both left and right or are you trying to ...

bridging it? The protection light will come on if the load is too much for the amp to handel. If the load (in Ohms) is less than the rated load that it can run, it will stop the output to keep the amp

protection light i have my sony xm-2002gtr hooked up to 2 rockford hx2 1000 watt subwoofers and the subs are hooked up in parralel and bridged to the amp with 5 guage 1400 watt wiring but my ...

...protection light comes on. My screws for to tightenend the speaker wire up are also kinda worn out and i cant really get them tight like want u think that may be the problem why and can these screws ...

...protection light stays on disconnect all the speakers from it.. turn it off and then on again, if the protection light is still on your amp has gone out and id take it to a pro to get it fixed. you ...

1300a, no sound, protect light 1300a, hooked to a pair of 650 watt 12 inch subs, worked great for ten minutes, now no sound from subs then protect light if i turn the amp up if u have the amp bridged ...

Legacy LA770 worked for 2 10" subs but not for 1 12" sub I have used my Legacy LA770 for a couple of months with no problems running 2 10" subs, I wanted to upgrade to 1 12" sub with 1200 watts. I ...

protection light i have an amplifier for my car and the protection light stays on and i have check all my wires and connections Disconnect one speaker at the time (at the amp) until the protection ...

protection light comes on i just hooked up a bmw 482 to 2 rockford fosgate 12 inch p1's. everytime it basses hard or deep the protection light comes on and the speakers quit. i turn off my deck for a ...

protection light your amp is faulty. Hopefully you have warranty. Your amp is clipping. No internal fuses. Your mosfets are toast. A thumbs up would be greatly appreciated if this answer is helpful to