RTO Intermatic T104R3 Timer Switch 220V - Metal Enclosure "install line" Questions

install dip tube that directs water to bottom of tank. http://waterheatertimer.org/How-it-works.html In the case of tankless water heater, return line must be connected to cold water inlet also. Add a

...will plug into outlet.Install the line switch onto the cord.Connect the cut-end of extension cord to light fixture, black-to-black white-to-white-green-to-green.Add a comment and include more

...there is not 1 work.... Your question is not complete.You have gas water heater in attic?You are installing recirculation system? Which recirculation do you have? .. so expert can read instruction ...

After installing the thermo bypass valve on the furthest sink faucet from the water heater, the sink faucet has no pressure, and there is hot water slowly comling out of the cold water valve. It ...

...install bore sighter big end towards the scope, tighten set screw on the machined part calber pilot. align holizontal line with the horizontal line on your scope. make your adjustments to zero your ...

...problem. To purge the line will depend on whether or not any shut off valves or drain valves are installed in the line. If there is a shut off valve in the line and a drain valve or hose bibb

installed t 104m timer wire for wire with old one ,still doesnt work. there is power to timer make sure that you do not have line and load crossed. The line is the power coming into the unit

install an Intermatic T104R3 for my pool. What is the difference between line and load? Do you have a picture of how the wires should be connected? 'Line' means 'power in' and 'load' means 'output' to

...install direct return line that cycles hot water directly back through drain valve on water heater, so hot water circulates independently from the cold water line. This system means cold water is ...

...install this timer to my hot water heater which runs off a 2 pole,30 amp breaker.The wire is black,white and ground.I believe the black and white are hot and should be connected from the breaker to ...