Eureka Smartvac 4870 Bagged Upright Vacuum "roller turn sweeper" Questions

roller doesn't turn when I put the sweeper in position to sweep. I have checked everything that pertains to the roller, even the belt, I can't find what the heck is wrong! The carpet knob to lower the

...What do I need replaced to resolve this issue? The roller brush will turn as long as the sweeper motor is running no matter what brand you have. Turn it off as you return it to the upright

...roller brush. Turn the sweeper upside down and stand it on the handle. Then look under the roller brush. I have two Oreck's in my house. You can take a screwdriver to loosen the clog and dump out the ...

roller. To Adjust the height of your vacuum cleaner, put the vacuum cleaner on carpet using the lowest setting and turn it on. Pull the handle back while slowly twisting the knob to raise the sweeper.

...Turn the sweeper upside down and stand it on the handle then take a screw driver to unclog the nozzle behind the roller brush. If the rest of the hose is clogged then you may have to take it to a ...

roller does not turn; I was vacuuming a rug and a string got stuck in roller-took it off but now the roller will not turn. suction is fine. The roller drive belt may be stripped, worn partway through ...

...turn the brush. Could be that too much hair, string, or long fibers have been collecting around the roller. Remove it and clean it off. Also check the duct behind roller that goes up into the ...

...sweeper model uh7240001 ...the belt is not turning....what sarong The belt stopped turning Either the belt broke or has fallen off the motorized pulley. The belt may have stopped moving because the ...

...sweeper bar was not turning. the base does not look level. How do I adjust this. The belt is not broken. remove the rim piece at vacuum inlet and press the roller back into its end slots. Should ...

roller brush doesn't turn I thought the problem was just that the belt broke. But I replaced the belt and turned on the sweeper and the roller brush would not turn and the belt broke. It is my ...