Black & Decker DF250 Cool Touch Deep Fryer "clean light" Questions

light tube and blow out with clean compressed air from a compressor. This should get rid of any residual water in there that is blocking the pilot light. Also, check the thermocouple if so equipped to

...light. If you are talking about the pilot flame being low it probably needs to be cleaned. you would need to shut off the gas to the fryer first. Then remove the gas tubing from the pilot assembly. ...

...light It sounds like the burners and tubes may be dirty and clogged in your fryer. The burners are removable and need to be cleaned periodically. The tubes can be cleaned when the burners are out ...

My Breville BDF450 will not turn on (no lights no nothing). Heated oil up prior to cleaning. Cleaned and changed oil now unit will not work at all Was working perfectly. Wanted to change the oil and ...

Pilot light will light but won't stay lit How do you clean the orifice? I don't think it is the ortice it is most likley the thermal coupling change it and this will keep your pilot light will stay ...

How oftern should a deep fat fryer Oil be change and unit be cleaned It depends on how much you use it. If you use every day all day them change oil once a week and cleaned at the same time. If used ...

pilot light wont stay lighted Hi there.Try cleaning the thermopile (cylindrical piece of metal behind the pilot) wwith a non-metal scrubbing pad. thermopile needs the heat of pilot flame to keep the ...

...light is fine but the buners sometimes takes 60 seconds to come on.They come on normal no explsion. Check incoming gas pressure, you may also need to clean out gas orafices. make sure you have the ...

...pilot when you push down the pilot button it means the pilot orfice is blocked and what it need is cleaning the pilot orfice. If the pilot light is on but goes off when you release the button then ...