10'' bench drill press model DP200 WON'T START I HEAR THE MOTOR HUMMING BUT NOTHING WILL TURN The belt has either come off the pulley or the belt is slipping. Open th top access hatch and check the ...
...start. could it the reset or on/off switches are bad? If it hums but doesn't turn it is almost certainly the starter capacitor which is fairly easy and cheap to replace . Usually a metal or plastic ...
My tablesaw will no longer run. I plug it in and turn it on, the blade partially moves and I hear a humming sound The motor is receiving power, and that is the humming noise. The humming sound also ...
arm saw want start just hums sounds like single phasing..is this a 3 phase saw..then one leg is down...if not, then it sounds like a start capacitor. Ensure the switches have been metered and are good
My craftsman table saw will not run. When I flip the switch the motor hums but does not turn the blade. The motor model number is 113.12171. Can this be fixed or do I need a new motor? That is the ...
...hums but will not start. The breaker then trips. Motor model number is 131 12171. Motor is manufactured by Mallory and is 1 hp. Manufacture model number is K 395FN 1047. Hi, The capacitor may have ...
...walnut, and hums when switch is turned on Does the motor and saw turn freely? If ok, then likely the motor start/run capacitor has failed. It is usually mounted on the outside of the motor
power is o k and blade will work after a push but will only hum when start button is on the starter is dirty. probably has sawdust in it. if you have a compressor you may be able to use it to solve ...
...hums but blade will not rotate When I turn on the motor blade moves about a 1/4 inch and then stops though the motor keeps humming. Cleaned out insides, removed brake switch and reinstalled it. Motor ...
will not start. Motor just hums. If is the compacitor where is located. The motor is 3hp and has two bump outs? Is there anything blocking the blade from rotating it sounds like it is jammed or locked
473 questions posted
Usually answered in minutes!
