stuck unloader on 200348gs pump Loss of pressure points to unloader being stuck. take the pump apart and clean and lube all the valves
Question about Honda Garden
...unloader valve is stuck open. You can lookup a parts breakdown for the pump on your unit and locate the unloader so you can remove it and clean and lightly coat it with silicone grease. ...
then pry out the unloader. the tip of the unloader should push in and out freely about 3/8 inch. if tip is stuck, strike softly with a hammer, grease the o-rings and replace. wah-lah pressure restored
...unloader valve is still stuck or sticking, try starting the unit with the wan trigger engaged water coming out to spray. If the unit runs while wan trigger is engaged and shut down when released your ...
...stuck unloader valve. Where is it and is there a diagram showing how to get to and clean? Hi The unloader valveis HERE If you go to D-2 it is part numbers 8 to 13. If it is stuck it is not only ...
pressure washer idles well but when i start to wash it bogs down and stalls... thoughts? It sounds like your unloader valve has stuck. Try greasing the unloader valve.
...unloader is stuck in closed position. Have to know what type of unloader it has to see how to get to the "ball" check. Probably rusted to the seat. Might have to replace the seat, orings and
...parts and possibly cause the unloader to begin working (if stuck due to debris/rust). You can find a gizmo to help you feed oil into pump on ebay /other web locations. Good luck with your
...unloader valve is either stuck open or is defective. The most common problem is the valve gets gunk in it and it gets stuck open not allowing the pressure to build. If you have an owners manual look ...
...A stuck unloader just needs to be unstuck and lightly cleaned. A light coating of silicon grease wouldnt hurt either! Get the manual for this pump and see how to open/remove the unloader
78 questions posted
Usually answered in minutes!
248 Questions
121 Questions
112 Questions
111 Questions
40 Questions