Question about Solis Coffee Makers & Espresso Machines
...grind is coming out very course. What should i do? Hi Your burr is not locked in. You need to remove the beans from the hopper. Remove the hopper. Remove the burr. Turn the grinder upside down over ...
Question about Cuisinart Coffee Makers & Espresso Machines
...will not release to clean The bottom half of the grind chamber is locked in place and can not be removed for cleaning. Every thing else works fine! 1) Rinse area with vinegar/water on a cloth to ...
grind on the super jolly is to remove the beans, turn towards fine until you can barely move the middle stem in the grind chamber, then turn towards course about 12-14 notches on the grinding adjuster
Question about Cuisinart Coffee Makers & Espresso Machines
...Remove grind chamber by pulling toward you. 4. Remove the burr grinder, once the bean hopper has been removed, by grasping the metal handle and lifting up. Use the brush to remove grinds or wash by ...
Question about Rancilio Coffee Makers & Espresso Machines
I disassembled the grinding blades and put it back together but now I can not get a find grind HI When you reassemble the removable burr assembly, you first must make sure that there are no grinds ...
...remove the bean hopper, and vac out the burr chamber, then put 1 tablespoon white rice in the burr chamber and cover with hand and turn grinder on, if the rice grinds, then your grind might have been ...
Question about Solis Coffee Makers & Espresso Machines
...grind setting and try again. If that doesn't work, remove the grounds drawer and vacuum the inside top where the grounds drawer was. You have a blockage above the grounds drawer. You can also rotate ...
Question about Rancilio Coffee Makers & Espresso Machines
...grind back. I opened up the top and am trying to remove the brass plate. but I can not budge it. Help! because it didn't work a wilde the upper burr holder could be jammed, carefully take id off, ...
Stopped working I was grinding beans this morning and my grinder did not finish grinding what was in the bowl. I kept trying in pulses. and then it stopped working. I smelled a hot electric smell. Now
...grind Remove bean hopper, clear chamber of all beans, either by grinding or using a vac cleaner, then turn adjustment collar finer until it cannot move, then back it up about 1/4 to 1/2 a turn. That ...
60 questions posted
Usually answered in minutes!
517 Questions
285 Questions
96 Questions
82 Questions
63 Questions