Century Portable Plasma Cutter 82021 "welding machine" Questions

...ground lead to? Is the welding machine phisicaly in contact to what you are welding ? Can you electrically insulate the welding machine from everything, say stand it on a sheet of timber? Regards ...

My lincoln ranger 8 has excessive weld spatter compared and the auto idle dosent kick in very fast when I strike off to weld delayed or sticks my rod. My other ranger 8 no issue same heats. Also weld ...

rod sticking ive went from low to high heat rod still sticks,when I do get weld started it welds funny.machine is brand new,a friend has one does same thing.20yrs ago had same machine,bought it used ...

...welding machine is dirty with soot on the inside. Unplug and remove the side plate on your machine and blow it out with compessed air. Keep the nozzle of the air hose aways back so you won't damage ...

A new welding machines lincoln 500s with wire feeder linc feed 45 co2 gas shielding ... when i begin the welding process continueous just for 10 seconds and then the wire feeder stop and then after 50

Bobcat 225 runs good but wont weld.Welded great one week prior Hi: Probably your machine overloaded. Check the fuses F1 and F2 and if they are open replace them. Both fuses are located at left hand ...

...machine. Step 5 Examine the welding cable for worn spots. A badly worn cable can cause problems. Step 6 Adjust the brake on the wire spool. Setting it too high or too low can cause problems with your ...

Welding machine stops working after a few minutes of welding. Checked the cooling fan it works fine. there is probley nothing wrong its called duty cycle.which means that if you are welding long ...

...welding machine problem. Ensure that you are using the correct contact tip in the welding gun, if the tip is too short; the cup will fill with splatter and submit excess heat to the cup. Also, make ...

welding machine wont start welding machine cranks but wont start.it was running well befor and the only thing that i replaced was the oil pan gasket cause it was leaking and then i cranked it to start