Briggs & Stratton Lawn-Boy Insight Series 21-Inch 190cc 650 Series Gas Powered Engine Variable Speed Self-Propelled Lawn Mower "oil 8" Questions

32:1, 8 ounces of oil to one gallon of fuel is 16:1 for the real old lawnboys, When Toro bought out OMC,and started using Tecumseh mowers,the ratio changed in the late 80's or early nineties ! IIRC :o

...oil plug on my yard machine/ b&s 6.75 series engine If you look under the mower where the engine shaft comes out of the engine you should see what we call a pipe plug. If will be either a male square ...

...8 pipe plug at the bottom of the oil dipstick. or there is one on the underside of the motor. You will notice it is a reverse from the other pipe plug in that you use a 3/8" ratchet and extension and ...

...8 hp oil capacity Need to know the oil capacity on a 8 hp MTD snow blower? What engine do you have?   Tecumseh those are usual 18-21oz  Not sure with briggs, but will be around a 1/2 qt ...

oil drain under with a 3/8 socket drive drain plug ? Hi lfancisco... Yes the oil drain plug is under the mower, normally a square plug,socket drive to remove to remove the oil from the machine. Please

changing oil how do i drain old oil from the mower. UNDER MOWER WHERE THE BLADE IS THERE IS A PLUG WITH A SQUARE HOLE THAT A 3/8 RACHET WILL FIT IN TURN IT COUNTER CLOCK WISE. THAT WILL DRAIN THE OIL.

...gas oil mixture. Then replace with a cup of straight gas. This should start and clear out the mix. Run out until it stops and refill with correct gas oil Usually 8-1- see the label on the oil

...model Most push mowers, you just take out the filler plug and turn it on it's side to drain.Set the mower up on blocks so it rests 6-8" off the ground, place a large catch pan underneath for the

...oil pan or jug beneath the mower. Use a 3/8" drive socket wrench and extension (no socket) to turn the plug counter clockwise (see photo at right), allowing the old oil to drain. How to Change Oil ' ...

...be found at the bottom of the engine. Look underneath your engine for the plug which will be a 3/8 inch plug which your wrachet wrench will fit. Drain and dispose of oil in a safe manner. GOOD