2009 Kia Borrego "manifold need removed change plugs" Questions

...kia borrego These SUV's came with 3 motor styles so you need to be more specific. if its a V6 you need to remove the intake manifold and the remove all the coils then you can take out the spark

...manifold and what do i need to be careful with. See I'm trying to replace spark plugs but it's buried intake manifolds do require a gasket , but you shouldnt need to remove intake to change spark ...

...manifold, if removed. Tighten nut to 53-72 Nm (39-53 lb-ft). Install spark plug heat shield and distributor to spark plug wires. Install oil level indicator tube to left exhaust manifold, if removed. ...

...need to change the 3 rear sparkplugs on my mazda mpv v6 engine? what do i have to remove to get at the plugs? How can I take the manifold out to change my spark plugs, in 2005 mazda mpv? Remove the ...

...need to loosen the intake manifold. This will require removal of attached components. Unclip and remove the black insulating material Disconnect the three PCV tubes. Push the tab across and pull ...

...need to remove the intake manifold to get to the rear spark plugs? I was told the 3 spark plugs in the rear has no access without removing the intake manifold - any special extnsions to buy? thanks ...

...I have to remove intake manifold? http://www.ehow.com/how_6523412_replace-spark-plugs-1995-maxima.html There are the steps to replace the plugs. You shouldn't need to remove the manifold. Thanks, ...

...Need to remove upper intake manifold to reach valve cover close to firewall. 1) The location of spark plugs 456 are under the plastic shield in front of the engine. It takes an 8mm socket to remove ...

...need to know how to change the back three spark plugs on my 2008 ford edge , do i remove the manifold.to get to them, is it safe Yes, you will have to remove the intake manifold. If you are ...

...manifold. You'll need to unbolt it and disconnect the hoses and connectors and move it enough out of your way. It would also be suggestable to get a new gasket for the upper intake manifold, increase ...