...door hard or it will not start if you just close the door it will not start The locking mechanism is not closing completely unless you slam the door because the plastic parts don't slide easily after ...
...The light wont go off as it should when the door is closed. If closed hard the oven will eventually work once in a while micro switch has loosened and moved back , or is faulty... 5 dollar ...
...door gets closed too hard (slammed). It could also be a wiring problem to the control board or a board problem itself but this is the least likely cause. It is also possible that a latch head can get ...
Question about Panasonic Microwave Ovens
...Door is hard to shut and is not latching correctly. I inspected the spring and latch and it appears to be working correctly. I noticed the two holes where the latch Inspecting the door and latch ...
...door hard, one of the limits are disrupted. that switches off the micro.(you are lucky by default because if wrong limit is switched accidently there could be a very loud bang.). Pull plug out and ...
...hard slams to shut the door so that the light goes off and the microwave will work. How do we fix this problem as I'm afraid we are going to break the door doing this so often. We have a Panasonic ...
Question about Microwave Ovens
...door. Then click time and start,it does not start.We are in East Marredpally model no., EM-N102-W/EM-N208W there is usually a fuse inside which could have blown but they are hard to get to however if ...
It's in an RV,the door just stopped being able to be closed and stay shut.We went into our RV and found the oven door open. Then we asked each mother about it, neither one of us remembers opening it. ...
...door hard to open? A: Your unit was designed for an airtight seal. A vacuum seal can form after the door is closed. Wait several seconds for pressure to equalize before reopening the door. I have had ...
27 questions posted
Usually answered in minutes!
255 Questions
122 Questions
129 Questions
91 Questions
99 Questions