...head screwdriver to remove the screw. If it is a lever handle, it takes a 7/64 Allen key to remove the set screw. The set screw is located underneath the lever handle on the round hub. Good ...
...water, locate and loosen handle set screw, remove cylindrical cover, and remove retaining nut to access stem. Take e stem with you to a home store or plumbing supply house for accurate
...locating the set screw, remove the cylindrical beauty cover, and unthread the retaining nut to access the valve stem. Take it to a plumbing supply house or home store to make certain of the
No cold water, Only hot water in showers. When i turn the single handle the water is cold until the hot water heater kicks in. Once the water turns hot, it stays hot. Even at the coldest setting, the ...
...screw at the end where you installed the first side rail. Lift up the loose end of the bottom rail and slide the second side rail into place. Mark the holes. Remove the side rail and drill the new ...
...set in a groove on the nipple. Remove the ring using a small screw driver. This can be a little tricky. Do not damage the plastic, and don't lose the lock ring.. Now you can remove the bottom of the ...
...locate the set c=screw in the handle and back it out. Next,Remove the Phillips screw holding the handle in place.Next turn the retaining ring counter clockwise and pull the catridge out of the ...
...locate allen set screw on handle and select the right size allen wrench to fit it. Loosen set screw and pull handle out away from wall to remove it. There should be a plastic disc on the handle stem, ...
how to remove the cover plate from a triton t80 shower Remove handle by locating set screw. Escutcheon (cover plate ) screws are now accessible to be removed.
1 questions posted
Usually answered in minutes!