Generac Guardian 100 Amp Transfer Switch NEMA 3R "nema 3r" Questions

generator will start when main power is loss, but will not shut down when power is restored. check your run timer

When measuring amps on a 220v circuit, do you add the two legs together for the total or use the average of the two. Neither. Amps on one leg must equal amps on the other leg.

transfer stay's in standby position afer power is restored check the low voltage contacts, it may be sticking or there may be dirt on the contacts

no power to unit no led lights light,no display in the led screen You need to check the 12v battery in the unit it is what powers the lcd display and led lights on the generator.

coil smoked on start up on the start up test run the coil smoke. this is a 20 kw generac THIS SOUNDS LIKE OIL IS LAYING ON TOP OF THE PISTON.

5875 generac starts running when switched to auto , Utility is hot .. using nexus smart sw. Check the N1 N2 fuses in transfer switch one or both of them are probably blown. N1 N2 fuses have the yellow

I have a 16Kw generac generator. The unit starts then the engine overspeeds but does not shutdown. The engine starts to exhaust white smoke. I shut it down after only a matter of 2 or 3 seconds for ...

Thinking of buying 5522. Want to hook up to Trace invertor with full generator management. Do not need / want control from Generac. Need to tie into start circuit. You need to contact TRACE about this

The 200 amp auto tranfer switch has been coming on it seems the 200 amp main utility is triping off once in a while. The loads on the home are not big enough to trip a 200 amp breaker are these ...

I need to obtain an owner's manual for a guardian elite 25K gen. I purchased a new, but preowned generator with an automatice transfer switch. Everything is there except the manual to instruct our ...