circular saw Safety issues Is it safe to use a regular model if I'm left-handed or should I buy a special one? If you are left-handed, you must be extremely cautious when operating a circular saw, ...
the switch is intermittent. The saw has #5375 on the nameplate. I t has the two-handed safety switch where you have to push the red one with one hand and squeeze the trigger with the other hand. ...
is the bolt holding the blade on a porter cable model 843 left hand?I can not budge it and it says LH Yes! If it's stamped LH it is left hand thread.
...that model number listed but generally a circular saw is standard thread, the mitre saw us left hand and a worm drive is also left hand
Can't remove blade on circular saw model 315.10951 A3155. Bolt turns or spins, but won't come out. This bolt is what called left handed thread so you need to turn it in the oppisite driction as a ...
...info about your saw. One thing that might be helpful to you is to know if it's a right- or left- handed thread. If you view the arbor from the end where the nut goes on, and the blade rotation is ...
...Thanks When you are facing the front of the table saw. Right above the Dewalt logo, there is a hand wheel that if you crank clockwise - it will tilt your table saw blade to the angle shown where ...
...years. Makita is a good brand. We used Milwalkee and Craftsman. My Milwalkee, I used the side of my hand to hit it into place >> I didn't hit it real hard, but the angle setting should move a ...
4 questions posted
Usually answered in minutes!
63 Questions
60 Questions
38 Questions
15 Questions
