I got the armature off of the crankshaft and now I'm wondering if there is anything special i have to do to get it back together or what. Any info about reinstalling the armature or anything else related to the generator or 10hp briggs and stratton would be greatly appreciated thanks
Best I can do is the IPB, at least it will show you where things are supposed to go. Make sure when you put it back on that it is as straight as you can get it or if possible, leave bolt loose and tighten after rest of housing is in place, but from IPB view this might be dreaming.
http://www.powermate.com/pdfs/2007/11/12/parts_pc0105000.pdf
SOURCE: I'm looking for the 2 cycle oil to gas dilution
20:1 that's 1/4 pint to a full tank of fuel.
128 views
Usually answered in minutes!
×