I have hyndai accent 2002 had the code 9141 would like to get some answer fo the code please send the infomation on my email [email protected]

Question edited for clarity.
Question moved to model category.

It is a Communication Code, not an Error Code.

Diagnosing Ford communication network problems

Auto Service World https://www.autoserviceworld.com > Features
The ISO 9141 network, is a single-wire, and is often identified as Circuit 70. There is no module-to-module communication on this network.

How do I bypass a ISO 9141 code on my 2011 Ford fusion

Fixya https://www.fixya.com > Forum > Cars & Trucks > Ford
Dec 5, 2021 - ISO 9141 is just a connection protocol. It means that your scan tool is not connecting properly. The code 9141 ...

..

If it is indeed a 2004 Kia Rio, this is the answer. It is a communication signal protocol, not a code.

Year Make Model in all questions please.

https://www.kia-forums.com/threads/odb-code-iso-9141-2.169418/

..

What exactly is the problem? Is it not charging? Does the battery/alternator light stay on when engine is running? Poor connections can cause no charging, so check all battery, alternator, and starter connections. Make sure all are clean and tight. If still no help, have the alternator tested while on the car and running.

NEGATIVE SHOULD BE GROUND.

no, just oder over the net, they will sent it to you, just google abs sensor for 2000 accent and there will be a few site you can order from.

the pump is sometimes in the resevoir that holds the winshield washer fluid in the container itself

check your starter sometimes the solenoid gets stuck if this is the case you will need to replace the starter.

Have them inspected -- they may be worn out already!

although your car may run fine, the bearings in the alt. or wat. pump could be going bad. only a mechanics stethascope can determine if its the idler pulley or pump, alt. ect.

you may have fried the alternator...try letting it charge for awhile about 20 minutes