1993 Dodge Dakota Logo
Posted on Jan 04, 2011
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Best way to fix front rearend gears are striped

2 Answers

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Scholar:

An expert who has written 20 answers of more than 400 characters.

New Friend:

An expert that has 1 follower.

  • Expert 91 Answers
  • Posted on Jan 04, 2011
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Scholar:

An expert who has written 20 answers of more than 400 characters.

New Friend:

An expert that has 1 follower.

Joined: Jan 03, 2011
Answers
91
Questions
4
Helped
21470
Points
218

I had the same problem in my '94. Front rearend striped, all the bearing went, I lost my pinion gear, my spider gears all wrapped around themselves and shattered.. It was a mess. (I think a leak occured, causing things to get really hot! )

I tried fixing it, but the parts for new gears and such was very expensive.
I ended up just going to a scrap yard, buying the whole housing, and dropped the old front rearend out, and slipped the new one in. It's a little painful to do, Not hard though. It took three people to do mine, being we had to balance the housing on a jack and try to replace the bolts. New housing cost about $200, as opposed to roughly $600 for new gears, plus making sure everything is spaced right!

So buy a used housing, and just replace it.

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 3,400 Answers
  • Posted on Jan 04, 2011
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jan 02, 2011
Answers
3400
Questions
1
Helped
986277
Points
10767

The ONLY way is to replace the carrier (gears) Are you sure it's gears and not the axle shafts? Gears are pretty "bullet proof" and usually the only way to harm them is to run low or out of gear lube.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I remove the whole rear and on a 98 tahoe?

While the vehicle is on a flat surface, block the front wheels front and back, jack the rearend of the vehicle up and place jack stands under the rearend, remove the drive shaft first the remove the square shaped u- bolts that hold the rearend to the leafsprings unhook the brake lines and emergency cable and installation is just the opposite jack the vehicle up high enough to pull out the rearend
0helpful
1answer

2000 pathfinder will hardly back up shakes bad

either the reverse gear is binding up in the trnsmission, the differential has issues or if its a stick(manual shift) the clutch needs adjusted or replaced..repost findings...
0helpful
1answer

I have a 85 dodge truck with 318 727 tranny short wheel base my rearend is noisy i want to change it . i pull a tow dolly with it the ratio is 3.26 gears i would like to get better gas milage will a...

Hello and Welcome to FixYa.com



the higher the number the higher the rpms 3:55 will burn more fuel. The 3:21 gets better gas mileage.



Thank you for using FixYa.com

Regards, Lee Davidian

Your FixYa Expert

0helpful
1answer

Are the gears in the rearend of a 4x4 truck the

Yes and No. All depends on what was ordered at the factory. They can be the same, but they may be differant. The glove box should have the gear ratios written down on the ID tag.
0helpful
2answers

I'm wanting to find out what rear end I have and ratio? Can I get it off the vin number?

posably but the best way is to open the inspectio cover and count the teeth on the ring gear and pinion gear then devide the first number by the second

If you need further help, I’m available over the phone at https://www.6ya.com/expert/michael_00678fd4800d19c5

0helpful
2answers

Rearend for a 1993 k1500 dont know how to find out the size

two ways this can be done.
1. in the gove box there is a build sheet a square
piece of paper thats glued on inside with a bunch
of three or four letter codes . call a dealer and they,
tell you which ones tell rearend info.
2. remove rearend cover , you will see veryis gears
count the teeth on the big gear on the left side,
write it down,count the teeth on the gear that comes from the drive shaft,write it down.
you can call dealer or divide the big gear[ring gear]
with the pinion gear the small gear that comes from
the drive shaft.
0helpful
1answer

No signal from the input speed sensor

Yes you didn't give me code number, with out it my best guess is broken wire at vss sensor near rt drive axle there is a purple wire with a white stripe & a light geen wire with black stripe both in a black conduit pull out & pull on wire gently if they come apart you found it resolder or get new connector at GM dealer
0helpful
1answer

Will 95 jeep gc rearend work in 97?

As long as they are the same rearend and the same gears, yes. ie a 9.25 rear with 3.92 gears will not work where a Dana 44 with 3.55 gears was.
0helpful
1answer

Gear Ratio

there should be a tag on one of the rearend cover bolts indicating the ratio.if not remove cover count all the teeth on the ring gear and pinion,divide the ring gear # by the # of pinion teeth and that will be your ratio.
0helpful
2answers

I was backing out of my drivewqay when i felt a catching like a rearend binding up. i went from drive to reverse and it continued for a while then i was able to get it into the garage. i jacked up the...

Sorry to tell you this really but there is not cheap fix. It needs a tranny shop and at minium will need a few gears and probably a clutch pack or too not too mention a complete cleaning and adjust service..AAMCO is reccomended
Not finding what you are looking for?

136 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...