The amber check engine light has come on and is staying on. Is there a way to find out what it means without going to a repair facility? How far can I drive with it on?

You need to get the fault codes read because of the red check engine light coming on. Do you have an OBDII reader? or does a friend have one? If not ... I would take it back to where you got it serviced.
The piece of data that could be helpful is the check engine light going on after refueling. If you are lucky ... you may have not 100% screwed the fuel cap back on with the final clicking. That can cause the check engine light to go on. It is curious though that your tire and VSC lights went on ... there may be something electrical going haywire.

Hello
When the service engine soon light (Also called the check engine light or engine management light) is turned on this is to alert you to the fact that Powertrain Control Module (computer) has detected a failure somewhere in the systems it controls you may not feel any difference in the way the engine runs, this can be the transmission or the engine or emission system, there are fault codes set in the modules memory for these faults. What needs to happen now is to have the powertrain control module scanned with a special tool called an OBD2 electronic engine control scanner or a OBD2 code reader. Once the code(s) are read then you must perform the diagnostics for each code and make the appropriate repairs based on the findings of the diagnosis that was performed, this is called doing "Pinpoint" testing.

Okay Russell,your check engine light is on,you can go to Autozone and they will scan your Jag. for free and it takes only a minute and a code will appear and they may be able to tell you what the code is or bring it back here and post it.

The red light is for warning the amber is for caution so your caution light is on thats the amber the amber is reserved for local market like brake pads,oil change,or abs that affects steering stability, The information is exclusive only your driver handbook will define it

If the light stays on when your moving that shows a problem....I think that what your seeing is the computer testing the verious curcuits as its programmed to do

The Amber Engine Icon means the same as a Check Engine Light. Your car's ECM (Computer) has stored a Trouble Code, and you will need a OBD II Reader (On- Board Diagnostic) to get the code so you can diagnose what is wrong with your vehicle. You can go to any AutoZone and they can read the code for you at no charge. You will need to diagnose and fix the problem before the Check Engine Light will turn off.

This means your vehicle has failed to complete one or more of a series of self-diagnostic tests, usually but not always emissions related. The only way to find out which system has failed the test is to have the Diagnostic Trouble Codes read with special diagnostic equipment. Once you know the codes stored in your vehicle's computer, it will help determine what repairs are needed.

P2441 means "Air injection system switching valve stuck closed"
(bank 1). I don't have a clue as to what they mean by that, sorry.

unfortunately this means you need to get yourself to a trusted transmission repair facility very quick. the torque convertor on your vehicle is not operating the way it should. this is going to be an expensive repair, i tell you this so your not suprised. but do your homework and find someone with a great reputation for their work. dont take your saab to just anyone. these cars can get really screwed up without the right people workin on it. the transmission will need to come out.

need to be scanned by a scan tool to get codes. once you get them we can have a better understanding of whats going on, just a side note that the flashing means a significant problem