What means ABS - 1991 Mercedes-Benz 560

gm had a problem with the abs systems on their 1999 trucks and cars the sensor seat would corrode and move slightly enough to set off the low speed sensor of the abs usually goes off at 5mph and less and doesnt set off the abs trouble code need to remove the front wheels and brake assembly to access the hub and abs sensor also check hub to make sure its ok- in the mean time pull the fuse on the abs ur brakes will go to a normal brake without the abs meaning if u step on brake hard[panic brake] u can lock up tires

abs light means u have a problem with one or more abs sensors located on the each wheel bearring or it can be one of the wheel bearring,brake light means u have to replace the emergency brakes and traction off can be a fault with the abs sensors or the abs pump but u can go to auto zone or any autoparts where tey can scan ur car for free

It means there is a fault somewhere in your abs system. While the light is on you will not have anti lock brakes. It just means you will resort to the old style of brakes before abs. It will not harm anything .but is something i would have checked out.

WHEN ABS LIGHT COME THAT MEANS YOUR ABS BRAKE SYSTEM NOT WORKING.I WOULD CHECK FUSE AND RELAY FIRST IF ALL IS GOOD.THE DEALERSHIP HAS TO FIX.BECAUSE YOU NEED DIAGNOSTIC EQUIPMENT TO WORK ON THE ABS BRAKE SYSTEM.

this is indicative of a failure in your braking system, detected on the electronic portion. if the ABS light is on, that means the computer will have logged a code, and having the vehicle scanned is the first place to start in the diagnostic procedure. this will narrow down the area of the problem, and then the diagnostics can begin. good luck!

Means your anti locking brake system is disable, when the ABS light is on means the ASB computer pick up a bad signal from one of your ABS sensor's, any auto parts place like autozone can do a free code reading, once you get the code get back with us here at FixYa so we can help you diag. your trouble code, also your brake will work fine it be like a car with out ABS, get it check out.

if abs light is on it means your abs system is not working properly due to disconnection of sensor of any wheel or problem with abs module but it dosn't mean that your brake will not work it will work but it will work like non abs brake , car wheel can get lock while sudden braking, don't worry but drive carefully, thanks.

the triangle is a severe caution and the abs has to do with your anti lock braking system. what this means is not that your brakes will not work but the system that prevents the brakes from locking when applied heavy is deactivated. so basically you will be brakeing like a car with no abs. this should be looked at soon just for safety reasons if you are depending on the abs but does not mean you can not not drive the car safely just with added caution. this should also be addressed by someone who KNOWS bmws and KNOWS abs systems. this could work out to be a very simple fix. cheers

it means you need to have it daignosed, you have a malfunction in the ABS brake system, could be anyone of a number of things, abs module, wheel sensors, etc...

When your ABS light comes on it means you have no ABS only normal braking. Also a traction light will come on at the same time becaust it is directly linked to the ABS to change torque before a wheel slips. You need to have it hooked up to a professional scanner, because there are many different possibilities of what is wrong with the ABS/TCS system. hope this helps!!!