WHERE IS THE TIMING BELT ON A 2002 KIA RIO LOCATED

Aligning the dual-cam pulleys - YouTube

? 3:22
https://www.youtube.com/watch?v=DPcoLEHEt1I
Nov 30, 2010 - Uploaded by JT
me trying to figure out how to realign the dual-cam pulleys that shifted when I removed the timing belt, shifted ...

2002 KIA Rio 1.5 Liter Timing Belt Replacement - YouTube

? 14:47
https://www.youtube.com/watch?v=jLkdnkFW9c0
Aug 10, 2012 - Uploaded by TheBGravit
Replacing the timing belt on my 2002 KIA Rio. ... Hubitools Universal Timing Gear Clamp - Duration: 1:26. Hubi Tools 618,464 views. 1:26. How to Align the Camshaft if My Timing Belt Broke : Timing Belts & Other Auto ... Kia Spectra Timing Belt Replacement - 1.8L DOHC Engine Part 1 - Duration: 11:36.

How to Align the Camshaft if My Timing Belt Broke : Timing ...

? 4:10
https://www.youtube.com/watch?v=yKFAmfeaycs
May 21, 2013 - Uploaded by ehowauto
Subscribe Now: http://www.youtube.com/subscription_center?add_user=ehowauto Watch More: http://www ...

get a service manuel, a cheap one will do.if you mess the job up you WILL have bent valves and piston damage to deal with

The timing belt is not the big cost,if the belt has broken while you where driving the car the you may need to spend up to $3000 dollars to repair the damage caused by a broken belt.If your belt is not broke and you have over 50000 miles then get it replaced,expect to pay about $600-$900.This is dependant of labour rates and problems occurred during the repair,your price may be lower.

what kind off belts are you using? only use kia belts and have them changed before 60.000 miles dont go over

The crankshaft pulley is ment to turn when starting engine
yes bent valves

Could be sign of a tune up indeed spark plug cables would be first thing to check one could be loose or water may be caught in it

If you are planning on replacing the timing belt and are not even sure where to find on the engine then please DONT attempt to replace it on your own. Replacing the timing belt requires knowledge of timing marks and tensioner adjustments. It does not simply come off and back on, it has to be aligned up properly with marks on the camshaft and crankshafts. Please leaave this to someone who knows! PS: the timing belt is located behind the plastic covers on the left hand side of the engine (looking from the front)

yes, this is VERY IMPORTANT, this is an interference engine, meaning the valves and the piston cannot be in the same place at the same time,or it will bend the valves.then you are looking at a major repair job,think or it as insurance on your engine. please rate my fix as i strive to be the best,questions,get back to me

On the Rio 2002, the tensionner is only used to apply pressure to the timing belt (installation) and cannot be adjusted. Once install the tensionner is "auto adjust" using a spring. If you need to adjust it,may be it time to change the timing belt KIT. Around 60,000 M.

Turn crankshaft so that timing marks on belt pulley are aligned with marks on engine . The 'I' on intake pulley is on top and the 'E' on exhaust pulley is also on top.Align crankshaft pulley with mark on engine.If your timing belt is broken then major damage to the engine has occored and kiss it good bye.