Question about 1996 Pontiac Grand Am

1 Answer

I have a 1996 pontiac grand am. I cannot get the ignition to work! i dont hava lot of $ in tha car so ide like to keep it that way! all i wanna do is bypass the ignition all together. however..the anti theft on tha car makes it next to impossible. if i could find a way to turn off or to get rid of the anti theft on the car then it would a perfect car for what i need it for! just drivin it to work and back so i dont care if i gotta start it with a screwdriver as long as it runs!!! please help!! thank u

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 478 Answers

Goto the junk yard and get a collum or as if then who they have rekey there steering colloums unless they have one and willing to give u a good price in exchange with yours they may cut u a deal

Posted on May 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a history of pontiac grand ams motors not shutting down entirely when turned off?


Its called dieseling its cause by the ignition relay sticking as well as a few other causes but most likely the ignition relay

May 02, 2014 | 2001 Pontiac Grand Am SE

1 Answer

Routing of pin 16 power source 1996 pontiac grand am


It goes to a fuse of course. The fuse is IDed in the owners manual

Sep 26, 2012 | 1996 Pontiac Grand Am

1 Answer

All dash lights stay on fuel gauge heatgauge tack dont work please help


Replace the electrical part of the ignition,the ignition switch.

Dec 21, 2010 | 1996 Pontiac Grand Am

1 Answer

1996 Pontiac Grand Am will not stay started


could be a lot of things!!
first i would change the fuel filter , and the maf sensor
also check for a vaccume leak,
and if that doesnt do it have the ignition modual checked!!
then the tps senor!!
is your check engine light on?
if so have it scanned for free at auto zone!!!

Feb 19, 2010 | 1996 Pontiac Grand Am

1 Answer

Will a brake caliper (drivers side)of a 1996 pontiac grand am fit a 2001 pontiac grand am?


No that will not fit the the body style changed in 98 see pontiac grand am 96-98 had the same body style and body parts. so i dont think it will work you will nedd to find a caliper off a 99-05 and that should work.

Jan 07, 2010 | 2001 Pontiac Grand Am SE

1 Answer

I need the fuse diagram for tha 1996 pontiac grand am gt


- take down the Vin # - call the local dealer and ask about recalls and service bulletins - you will be amazed. Some recalls must be fixed for the life of the vehicle.

While on the phone - tell them you need the diagram - they will print it out and you can go get it - - free -

Dec 28, 2009 | 1996 Pontiac Grand Am

1 Answer

Anti theft THINK i AM STEALING MY CAR


try this.
PASS LOCK RESET GM CARS 1999 UP
1) Put the key in the ignition and turn to the "ON" position. Leave it that way for 10 minutes. After 10 minutes turn the key and take it out. Repeat this process (2) more times (3 times, 30 minutes total) This should reset the passlock system to recognize your key.

Mar 10, 2009 | 2000 Pontiac Grand Am GT

1 Answer

ENGINE STALLS WHEN I STEP ON GAS PEDAL


Sounds like your fuel pump is going bad! The more you press on the pedal the more demand is on the pump and it cant keep up cuz its junk. Try to limp it to a shop to replace it, unless u wanna do that yourself.....

Jan 19, 2009 | 1996 Pontiac Grand Am

1 Answer

The car doenst wanna start


This sounds like the battery cables are bad, were they covered with white powder?

Nov 05, 2008 | 1996 Pontiac Sunfire

Not finding what you are looking for?
1996 Pontiac Grand Am Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...