While replacing a break pipe on 95 renault espace 2.1 TD rear offside between flexhose and the load compensator.I had to apply heat to the load compensator to release brake pipe.I replaced the pipe but since I noticed brake fluid coming from the compensator.Are there any seals in the compensator I may have damaged thanks
Re: While replacing a break pipe on 95 renault espace 2.1...
Yes there are seals inside the valve . its an easy part to replace but it has to be taken to renault to have the load spring reset to the correct pressure after refitting
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
there is a orange or red pull cored under each of the seats pull this and it moves two metal securing rods that fasten the seats to the floor some times they stick but give the rear rod a tug back towards the rear door and it should unlock and lift the back of the seat job done
The stop lamp switch is screwed into the hydraulic pipe line and is located on the chassis frame offside side member, adjacent to the engine rear crossmembember. The switch is operated by pressure or fluid in the break system.
×