Iam not geting power to the fuel injectors on a 93 pontiac grand am

How do you know that no fuel is getting to the engine ? Did you check fuel pressure with a fuel pressure gauge ? Did you check for spark at a plug wire ? What short did you have in the dash ? There are videos on youtube on trouble shooting a no start condition .Your instrument cluster is probably bad . You can get a new used one at the nearest auto salvage yard for $20.00 Also if security light is lit on the instrument cluster the vehicle won't start . The anti-theft system on these will disable fuel injectors .

Did you check the fuse to see if it had power ?
Its marked FP/INJ in the fuse box in the engine compartment.

Coilpacks or possibly crank sensor, also check to see if fuel system is bleeding air while vehicle is off

NO, what engine do you have?. Always state what engine you have.Fuse #48 15 amps, labeled FP/INJR in fuse box powers the injectors. The injectors are powered with the key on and the ECM grounds (opens) the fuel injectors. If there is no power to the injectors you need to find out why.

You will need to change fuel filter air filter pug wires and clean all injectors with a high quality cleaner that is poured into the fuel tank.Check MAF sensor and both 02 sensors.These will make a big difference in performance.

first check over all electric fuses.check all fluids,oil,antifreeze. when fuel is not reaching fuel injectors,check for clogged fuel filter or lines and defective fuel pump. make sure all spark plug wires and coil wire are hooked up and not shorting out or broken off.

HI! Can you please tell me more what happens to the car? THis will help to sort out the problem. Thanks!

fuel injector sound like the problem if you have checked the power with a node test the injector and you have pwer then mest likely the ijector is clogged ,so first make shure you have power to the injector hope this is helpfull

under the hood in a black box though its not labled it is 2"x2" there should be one for the power windows rite nxt to it and yes they are the same so you can switch them...

Mass air flow sensor.