At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
1992 lexus sc300 repair: Electric outside mirrors won't move (work); Door locks won't unlock or lock using the remote key button; the interior rear view mirror is darken out for night driving only. I listed the these problems, since they may be related to the soultion - I don't know. Thank you for your help! [email protected]
The mirrors most likely need to be replaced, rarely do the switches go bad. try replacing your key fob battery. do the doorlocks work from the master switch? and make sure the auto dim mirror is on. the little green light is hard to see sometimes.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Quit SHOUTING will ya :>D Typing in all CAPS is considered SHOUTING in Internet land. It also make the text VERY HARD TO READ.
You need a good, local auto electrician with a pro-grade scan tool computer. You have a faulty module probably Body Control Module, or Security System Module, the sensors and receivers connected to them, or a general communication issue.
May need new actuator. Try a slight lubricant like wd40 if that does not work. Try working switch back and forth. They usually start having problems when they get this old. You can have it replaced, but toyota /lexus is notorious for labor intensive repairs with can be costly if you take it to a dealer or very time consuming if you replace the actuator yourself.
Check your harness on the driverside, between the door and the body frame. The harness sometimes get spliced by the hole in the frame. This would cause the electronics wires to touch (sometimes work/ sometimes don't). GL.
1. sitting in driver seat, with driver's door OPEN, press lock/unlock
button ON THE DRIVERS DOOR to lock all doors, then manually unlock
driver door only. 2. Insert YOUR key in ignition, DO NOT TURN, then remove key. 3. Using the same lock/unlock button ON THE DRIVERS DOOR, slowly press lock-unlock in 5 cycles 4. Shut door. 5. Open door. 6. Using the same lock/unlock button ON THE DRIVERS DOOR, again slowly press lock-unlock in 5 cycles 7.
With the door open insert your key into the ignition, turn to 'on'
position (DON'T START), wait 5 seconds. Turn off and remove key. 8.
Locks should cycle once (Car will lock and then unlock once by
herself). If they don't cycle or they cycle more than once, do steps
1-7 over. 9. Now using the remote, push lock button, hold for one
second, then release the button. The locks should cycle once. If not,
start over and go slower. 10. Close the door. 11. Open the door. 12. Press the lock button on the remote. The locks should do a lock-unlock cycle. 13. Close the door 14. Press the lock button on the remote, the doors should lock. 15. Press unlock button and the doors should unlock.
1. sitting in driver seat, with driver's door OPEN, press lock/unlock
button ON THE DRIVERS DOOR to lock all doors, then manually unlock
driver door only. 2. Insert YOUR key in ignition, DO NOT TURN, then remove key. 3. Using the same lock/unlock button ON THE DRIVERS DOOR, slowly press lock-unlock in 5 cycles 4. Shut door. 5. Open door. 6. Using the same lock/unlock button ON THE DRIVERS DOOR, again slowly press lock-unlock in 5 cycles 7.
With the door open insert your key into the ignition, turn to 'on'
position (DON'T START), wait 5 seconds. Turn off and remove key. 8.
Locks should cycle once (Car will lock and then unlock once by
herself). If they don't cycle or they cycle more than once, do steps
1-7 over. 9. Now using the remote, push lock button, hold for one
second, then release the button. The locks should cycle once. If not,
start over and go slower. 10. Close the door. 11. Open the door. 12. Press the lock button on the remote. The locks should do a lock-unlock cycle. 13. Close the door 14. Press the lock button on the remote, the doors should lock. 15. Press unlock button and the doors should unlock.
1. Start with key out of ignition, drivers door is open all others closed and drivers door is unlocked. 2. Insert key into the ignition (DO NOT Turn) and Pull key out. 3. Perform these steps within 40 seconds. A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second. (1Cycle = 1 lock and 1 unlock). B. Close, then open drivers door. 4. Perform these steps within 40 seconds. A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second. (1Cycle = 1 lock and 1 unlock). B. Insert the key in the ignition cylinder. C. Turn the ignition to ON (Do NOT Start) then back to OFF. D. Remove the key from the ignition. 5. Press any button on remote for a minimum of 1 second. System should now lock and unlock doors once.
6. Close and open drivers door. 7. Press any button on remote for a minimum of 1 second. System should now lock and unlock doors. Once to confirm programming, twice to indicate programming failed. 8. Repeat steps 5, 6 and 7 for additional remotes.
×